Investigation 8

Biotechnology: Bacterial Transformation

How can we use genetic engineering techniques to manipulate heritable information?

Unit 6: Gene Expression and RegulationIST-1.PScience Practice 6.D≈ 4 class periodsAbout 115 minutes in total
Overview

What you'll investigate

You will move a jellyfish gene into E. coli. Using the pGLO plasmid, you'll make bacteria competent with calcium chloride, heat-shock them, let them recover, and spread them on three kinds of agar plates. After incubation you'll find out which cells picked up the plasmid, which ones glow green, and how efficient your transformation was.

In the virtual bench below you carry out each step of the real protocol. You can follow it exactly, or change a step (skip the ice, shorten the heat shock, add more plasmid) and see how the outcome changes. You'll predict every plate before you see it, count colonies, and calculate transformation efficiency the standard way. Then you'll design your own experiment on what makes transformation work.

Learning objectives
  • IST-1.P Explain the use of genetic engineering techniques in analyzing or manipulating DNA.
  • Science Practice 6.D Explain the relationship between experimental results and larger biological concepts, processes, or theories.
  • Use selection (ampicillin) and an inducible gene (GFP under arabinose control) to tell transformed cells from untransformed cells.
  • Calculate transformation efficiency and report it in scientific notation.
Safety at the real bench
  • Use sterile technique. Do not touch the loop ring, pipette tips, or agar surface, and never set them on the bench.
  • The E. coli strain is not pathogenic, but treat it with care: wear goggles and gloves, wash your hands before and after, and keep food, drinks, cosmetics, and phones out of the work area.
  • Wipe down work surfaces with 10% bleach. Soak all used tubes, loops, and plates in 10% bleach for 20 minutes (or autoclave) before disposal.
  • Ampicillin is in the penicillin family. If you are allergic to penicillin, avoid contact with it. Rinse eyes with water if exposed.
  • Keep your nose and mouth away from the tip when pipetting cell suspensions.
Background

Moving genes into bacteria

Key ideas
  • Transformation is a cell taking up naked DNA. pGLO is a plasmid that carries bla (ampicillin resistance), GFP and the regulator araC.
  • Only transformed cells grow on LB/amp, so colonies there count transformation events.
  • GFP is switched on only when arabinose is present, so transformed colonies on LB/amp/ara glow green under UV.
  • CaCl2, a cold chill and a quick heat shock help plasmids enter; a recovery in LB lets bla be made before plating.
  • Efficiency = colonies ÷ µg of plasmid DNA spread on the plate, reported in scientific notation.

Information in DNA directs a cell through RNA and protein. Change a cell's DNA and you can change what it makes and how it behaves. Biotechnologists use this to make bacteria that produce human insulin, vaccine proteins, and industrial enzymes. The same tools raise real questions, such as whether genetically modified crops like Bt corn are safe to eat.

Bacteria gain new genes in three natural ways: conjugation (direct cell-to-cell transfer), transduction (a virus carries DNA in), and transformation (a cell takes up "naked" DNA from its surroundings). Frederick Griffith first saw transformation in 1928, when harmless pneumonia bacteria became deadly after mixing with heat-killed deadly ones.

The pGLO plasmid and the GFP switch

Most lab transformations use plasmids: small, circular DNA molecules that copy themselves separately from the bacterial chromosome. A plasmid needs an origin of replication (ori) and usually carries a few useful genes. The plasmid you'll use, pGLO, carries three genes that matter for this lab:

  • bla codes for beta-lactamase, an enzyme the cell secretes that breaks down ampicillin. Cells with pGLO survive on ampicillin; cells without it die.
  • GFP codes for green fluorescent protein from the jellyfish Aequorea victoria. It glows green under UV light.
  • araC codes for a regulatory protein. Without the sugar arabinose, AraC keeps the GFP gene switched off. When arabinose binds AraC, the protein changes shape and turns on transcription of GFP. This is an inducible operon, similar to the lac operon.
pGLO ≈ 5.4 kb GFP bla (ampR) araC ori GFP switch (arabinose operon) No arabinose PBAD GFP gene AraC AraC blocks transcription → no GFP, cells look white With arabinose PBAD GFP gene AraCarabinose transcription AraC + arabinose recruits RNA polymerase → GFP made, colonies glow green under UV
The pGLO plasmid (left) and how arabinose switches on the GFP gene (right). Arrows show the direction of transcription.
Why the procedure works

Why the procedure works. DNA and the cell's outer membrane are both negatively charged, so they repel each other. Calcium ions (Ca2+) in the cold transformation solution neutralize those charges and let plasmids stick to the cell surface. Chilling makes the membrane rigid. A sudden heat shock (0 °C → 42 °C → 0 °C) creates a temperature imbalance across the membrane that helps pull plasmids inside. The cells then recover in LB broth so they can repair their membranes and start making beta-lactamase before they meet ampicillin.

How you know it worked

How you know it worked. Each colony on an agar plate grows from one cell. Only transformed cells can grow on LB/amp, so counting colonies there counts transformation events. On LB/amp/ara plates, transformed colonies also glow. Plates without ampicillin are controls that show the cells were alive.

Transformation efficiency

Transformation efficiency tells you how many cells were transformed per microgram of plasmid that reached the plate:

Transformation efficiency = colonies on the LB/amp plate ÷ µg of plasmid DNA spread on that plate
DNA used (µg) = concentration (µg/µL) × volume (µL)
Fraction spread = volume spread (µL) ÷ total volume in tube (µL)
DNA spread (µg) = DNA used × fraction spread

Efficiencies are large numbers, so report them in scientific notation, for example 3.1 × 103 transformants/µg.

What this simulation models
  • Process: Bacterial transformation. E. coli cells take up the pGLO plasmid, which makes them resistant to ampicillin; arabinose switches on the GFP gene so colonies glow.
  • Included: Transformation solution, amount of cells picked, plasmid amount, time on ice, heat-shock temperature and time (more uptake but more cell death), recovery time, volume plated and incubation time (satellite colonies). Colony counts vary at random, and each student’s competent cells differ.
  • Simplified or left out: Colony numbers come from a formula fitted to typical classroom results. Contamination, old plates, uneven spreading and pipetting mistakes are not modeled, so real counts vary much more, sometimes down to zero.
Pre-lab check

Before you start

Procedure · Structured inquiry

Transform E. coli with pGLO

Before you begin: The +pGLO tube receives plasmid DNA; the −pGLO tube does not. Follow each tube through the steps and keep track of which plates receive its cells. Before incubation, predict the growth and fluorescence on every plate.

Need a quick science reminder?

The −pGLO tube is your comparison control. LB supports bacterial growth; ampicillin selects for cells carrying the resistance gene; arabinose switches on GFP expression in transformed cells. Use the plate results to distinguish survival from green fluorescence. Review Background if you need to revisit how the pGLO genes work.

Controls

Full procedure and protocol checklist

Work through the protocol one step at a time. Each step shows the standard protocol setting by default. Change a setting or press Skip step if you want to test what that step does. Before incubation you must predict what each plate will look like.

Protocol
    +pGLO tube—
    −pGLO tube—
    StatusReady

    Your predictions

    Lighting:

    Count the colonies

    Choose a plate, then click (or tap) each colony to mark it. Click a mark again to remove it. Each colony grew from one cell. Plates with a lawn are "too many to count."

    Colonies you marked (colonies)0

    Incubate your plates first.

    Calculate transformation efficiency

    Transformation efficiency: four steps
    1. DNA used (µg) = concentration (µg/µL) × volume added (µL).
    2. Fraction plated = volume plated ÷ total recovered tube volume.
    3. DNA plated (µg) = DNA used × fraction plated.
    4. Efficiency = colonies on +pGLO LB/amp ÷ DNA plated (µg).

    Use your own volumes and colony count, not example values.

    Use the +pGLO LB/amp plate, because it shows the cells that took up the plasmid. Look back at the protocol for the plasmid concentration (0.005 µg/µL) and every volume you added to the +pGLO tube.

    Volumes in your +pGLO tube—

    Results from your transformations

    Dashed lines mark the typical range for this protocol: 8.0 × 102 to 7.0 × 103 transformants/µg.

    Designing and conducting your investigation

    What helps or hurts transformation?

    Do bacteria take up more plasmid under some conditions than others? Pick one variable from the transformation process, hold everything else at the standard protocol settings, and measure how efficiency changes. Run several replicate transformations at each level so you can judge variability with error bars (mean ± 2 SE).

    Controls

    Levels to test
    More options

    Held constant: everything else at the standard protocol settings.

    Are satellite colonies transformed?

    After 48 hours you may see tiny satellite colonies clustered around big colonies on ampicillin plates. A good test question is whether satellites carry pGLO. Pick a colony, streak it onto a fresh plate, incubate, and look under room light and UV.

    Controls

    ResultPick a colony and streak it.
    Analyzing results

    What happened on your plates?

    Need to check the transformation procedure and sample volumes? Review that investigation section before interpreting your results.

    How do I use plate evidence to support a transformation claim?
    1. Compare controls. Identify which plates received +pGLO or −pGLO cells and which contain ampicillin or arabinose.
    2. Separate growth from glow. Growth on ampicillin is evidence of resistance; green fluorescence under UV is evidence of GFP expression under the tested conditions.
    3. Interpret efficiency. Use the number of transformed colonies and the mass of plasmid DNA actually spread on the plate. Check units before reporting colonies per microgram.
    4. Explain uncertainty. Consider colony-counting limits, lawns, sample volume, and protocol variations before comparing outcomes.

    Support your claim with results from your own plates rather than assuming every colony fluoresces.

    Before you looked

    After incubation

    What does your efficiency mean?

    Claim, evidence, reasoning

    Scientific reasoning self-check (optional)

    Review your own explanation before submitting. These checkpoints are reminders, not automatic grading or evaluation of your writing.

    • My claim distinguishes bacterial growth from GFP fluorescence.
    • I cite specific +pGLO and -pGLO plate observations and relevant controls.
    • I explain ampicillin selection and arabinose-dependent expression appropriately.
    • I discuss colony counting, transformation efficiency, or another limitation.

    If something is missing, revisit your measurements and revise your explanation. Your writing is not automatically scored here.

    Evaluating results

    Reflect and go further

    Wrap up

    Save and hand in your work